テストラム Japanese
メールContact

T8200PRO LF band / HF band [Resonance frequency inspection machine] Non-contact IC card NFC tag ID

Features

  • With this one unit, it is possible to inspect the LF band and HF band (inspection items: resonance frequency, attenuation, Q value, option: ID reading).
  • A directional coupler is built into the main body, and it is possible to inspect transmission characteristics or reflection characteristics.
  • The inspection result and inspection waveform are automatically saved in the log file.
T8200PRO main unit
* In addition to the standard type, there is also a contact input / output (DIO) equipped type.
* Inspection probe antenna [for card] and antenna [for tag] are sold separately.
* For more information about this device, please check the technical information.
The inspection log is automatically saved in csv format.

Inspection principle

The inspection probe (antenna) and the inspection target (non-contact IC card, RFID tag) are magnetically coupled and frequency swept to inspect the transmission characteristics or reflection characteristics.

Application

* Can also be used for inspection of self-resonant frequencies other than RFID.
Specification
Measurement method
Non-contact resonance frequency measurement by magnetic field coupling
Measurement details
Amplitude of transmitted voltage or reflected voltage
Inspection item
Resonance frequency, attenuation, Q value, option: Unique ID (UID, IDm) read
UID read-enabled protocol *1)
ISO14443A(MIFARE Classic, MIFARE Ultralight): UID
ISO14443B: PUPI
FeliCa: IDm
ISO15693(Tag-it HF-I Plus/Pro, I・CODE SLIX2): UID
Number of measurement points
100～2048 point
Inspection time Note 2) (When the number of measurement points = 1000)
No ID reading test: 0.5 sec (typ)
With ID reading inspection: 1 sec (typ)
Inspection result / inspection waveform storage function
検査ログファイル(csv)：
検査時刻, ID, PASS/FAIL, 共振周波数, 減衰量, Q値
波形データ：csv, jpg形式
Frequency setting range
10 kHｚ ～ 1200 MHz
Applied power (@ 50Ω load)
－30～+15 dBm
DIO circuit format
Insulation (photocoupler) input / output
Absolute maximum rating of DIO terminal
Input terminal: Input forward current 50mA Output terminal: Forward voltage 80V, reverse voltage 7V, forward current 50mA
System requirements
PC(OS): Windows7, Windows 8.1, Windows10
USB2.0以上
Power supply
USB bus power (current consumption 500mA or less)
Accessories
Main unit, USB cable, coaxial cable (2 500mm), Windows installation CD
Dimensions, weight
125 (W) x 165 (D) x 40 (H) mm 0.8kg without protrusions
*1) This unit is not an RFID reader / writer. It is not a device intended to evaluate the communication performance of the inspection target. Depending on the inspection target, the UID may not be readable.
*2) The inspection time depends on the inspection settings of your PC and instrument, the characteristics of the inspection target, etc.
* Design and specifications are subject to change without notice.

Related information