ContactProduct information
[Card set (short side)]
[Operation / display unit]
[Short side bending stress endurance test (video)]
ISO/IEC10373-1、又はJISX6305-1、及びISO/IEC CD24789-2:2008-04 準拠
It is a device that performs stress endurance tests on the bending characteristics of IC cards, and has a function to automatically stop when the set number of times is reached.
By exchanging the connecting rod, you can switch between the long side and the short side.
An emergency stop switch and an interlock cover are used as a safety mechanism.
This product is a made-to-order product, so please contact our sales staff for delivery.
By exchanging the connecting rod, you can switch between the long side and the short side.
An emergency stop switch and an interlock cover are used as a safety mechanism.
This product is a made-to-order product, so please contact our sales staff for delivery.
|
Specification
|
|
|
Basic functions
|
Number of tests: 5 for both long and short sides
Bending speed: Fixed 30 times / minute, variable 10 to 50 times / minute Bending amount Long side maximum deflection hw: 20.00mm + 0.00mm, -1.00mm Minimum deflection hv: 2.00 ± 0.50 mm Short side maximum deflection hw: 10.00mm + 0.00mm, -1.00mm Minimum deflection hv: 1.00 ± 0.50 mm Switching between long side and short side: Connecting rod (unit) replacement |
|
Control panel
|
Start switch, stop switch, main power switch
Fixed speed variable selection switch, speed adjustment volume 6-digit counter (display, number of times setting button) Emergency stop switch |
|
Others
|
When stopped, it returns to the origin. (Except during emergency stop)
It has a deflection amount measurement function and a fine adjustment mechanism. (Manual) The long side and short side can be changed. Connecting rod (unit) replacement (manual) |
|
Safety mechanism
|
Emergency stop switch, interlock cover
|
|
External dimensions
|
Body: 304.0W x 303.0H x 352.0D (mm)
|
|
Power supply
|
AC100V
|