ContactProduct information
Above: [Module misalignment visual inspection]
Bottom: [Punch hole inspection]
Bottom: [Punch hole inspection]
[Module visual inspection]
Peace of mind for the module at the time of shipment and acceptance.
It is a device that performs shipping inspection, acceptance inspection and issuance of module COT (Chip On Tape) for IC cards.
If we can test at the COT stage and write the program of the common part in the non-defective product, we can improve the productivity of the IC card in the 0th and 1st issuance.
General DC characteristic inspection, issuance, and visual inspection can also be powdered.
Of course, you can customize and flexibly respond to changes and additions of measurement items.
We support the mass production of reliable IC module products for our customers.
If we can test at the COT stage and write the program of the common part in the non-defective product, we can improve the productivity of the IC card in the 0th and 1st issuance.
General DC characteristic inspection, issuance, and visual inspection can also be powdered.
Of course, you can customize and flexibly respond to changes and additions of measurement items.
We support the mass production of reliable IC module products for our customers.
|
Specification
|
|
|
Basic functions
|
Issuance of contact inspection (see T8000)
Non-contact inspection issuer (polling command transmission test / issue) Visual inspection section (COT terminal surface scratch / dirt inspection / mold surface shape misalignment inspection) Bad punch part |
|
Reference external dimensions
|
Body: 3500W x 1800H x 900D (mm)
|
|
Required equipment
|
Three-phase 200V 30A
Air 0.5Mpa 70L / min |