ContactProduct information
Features
-
You can communicate with the UHF tag while stepping the power between 800MHz and 1000MHz, and plot and evaluate the communication performance of the UHF band tag.
-
Arbitrarily set multiple points to be inspected, and perform [PASS / FAIL] judgment at the set points.
Control from mass production equipment (PLC) is also possible with the optional DIO interface. -
You can save the data that has been inspected for normal tags in advance, and then judge the quality of the target tag.
※ Dedicated software is attached, and you can set these measurement scenarios and display the results on the screen.
* Inspection logs can also be saved.
* Inspection logs can also be saved.
* Contact input / output (DIO) type is also available
|
Specification
|
|
|
Communication protocol
|
EPC Gen2
|
|
Modulation
|
ASK 100%
|
|
Encoding
|
Transmit: PIE
Receive: FM0 |
|
Transmit Frequency
|
Settings： 800MHz to 1000MHz (1MHz step)
Accuracy： ±20 ppm |
|
Communication Scenarios
|
From Query to RN16
From Query to EPC（Response to ACK） From Query to Handle From Query to MemBank read (up to 12 words) |
|
Number of Test Points
|
No limitations
|
|
Test Time
|
Less than 100ms at the condition below
( From Query to EPC（Response to ACK）, 1 test point) |
|
Output Files
|
Test Log (SQLite format)
Screenshot of Test Window (jpg format) Waveform data (xml format) |
|
Operation Mode
|
Manual operation
External software control (via Windows Registry) Digital I/O（DIO）operation (Option: DIO) |
|
(Option: DIO)
DIO Interface |
Isolated （opto-coupled） terminals
Output terminal：VCC=24V, Iout < 20mA, Residual voltage < 1V |
|
(Option:DIO)Absolute Ratings of DIO Terminals
|
Input：forward current 50 mA, reverse voltage6 V
Output：forward voltage 40 V, reverse voltage6 V, sink current 100mA, power dissipation 120mW/ch |
|
Power Supply
|
USB2.0 bus powered （current consumption less than 500 mA）
|
|
Operating Temperature
|
23 +/-5℃(within ±3°C of the temperature at which calibration is performed)
|
|
Size, Weight
|
150mm(W)x185mm(D)x60mm(H) protrusion not included, Approx1.0kg
|
|
System Requirements
|
Windows 7, 8.1, 10, 11
USB 2.0 or higher Screen resolution: 1024x768 or higher |
|
Supplied Accessories
|
Main unit, USB cable, coaxial cable (1m×2), Windows install CD
|
|
Operating temperature
|
5℃～35℃
|
Note 1) The inspection time depends on the inspection settings of your PC and this machine, the characteristics of the inspection target, etc.
* Design and specifications are subject to change without notice.
* Design and specifications are subject to change without notice.